News

  • Rules of die-casting mould installation

    Rules of die-casting mould installation

    The installation of the die-casting mould is very critical, so we need to install it according to the relevant rules to prevent damage to the die-casting mould. 1. The installation position of the mould conforms to the design requirements, and the distance between the mould expansion force center an... read more

    Jul 17,2020 News
  • Six requirements when choosing mould parts

    Six requirements when choosing mould parts

    In order to better use the mould, we need to choose according to specific requirements when purchasing mould accessories.The common requirements for mould accessories mainly include the following:   1: Simple installation and how to maintain the parts: Check whether the delivery instructions ar... read more

    Jul 11,2020 News
  • Residues in the mould cavity are one of the reasons that cause under-casting

    Residues in the mould cavity are one of the reasons that cause under-casting

    During the production process of die-casting parts, there will be many quality problems, that is, as a common quality defect of die-casting parts, one of which is under-casting, which causes the under-casting of die-casting parts. as follows:   During the forming process of die-casting parts, s... read more

    Jul 02,2020 News
  • Assemble the concave mould should be placed horizontally

    Assemble the concave mould should be placed horizontally

    In the process of using the continuous stamping die, it is very necessary to do maintenance work, and it is necessary to carry out maintenance work carefully and patiently, so as to ensure the safety and usability of the continuous stamping die.   Maintenance of punch and die   When disass... read more

    Jun 24,2020 News
  • The difference between die extrusion and injection moulding

    The difference between die extrusion and injection moulding

    Extrusion   It is a moulding method to make plastics in viscous flow state through high-temperature and certain pressure, through a die with a specific cross-sectional shape, and then at a lower temperature to form a continuous profile of the desired cross-sectional shape. The production proces... read more

    Jun 19,2020 News
Contact Us